TriSecure™ Hinged Security Door Self Latching Multipoint
Rod-driven multipoint kit used with the Gainsborough Mode Digital Security Door Lock which adds two remote locks to a security door. Contributes to turning a barrier door into a AS 5039 compliant security screen door.
Description
Product Features
- Adds multipoint locking to the Gainsborough Mode Digital Security Door Lock
- Multipoint kit is driven by steel rods
- Jemmy resistant strike plates
- All three hook bolts are latched as the door is closed, and locked as the center lock is locked
- Fits into industry standard door cutouts
- Suits both right hand hinged (RHH) and left hand hinged (LHH) doors
- Australian designed and manufactured
Installation
The product must be installed according to the instructions included in the product packaging and the door should be apertured according to the door “cut-out” dimensions and tolerances shown.
Prior to fitting ensure that:
- Doors stored on site are stored in a clean dry area free from cement, lime, paint, acid etc.
During fitting of the lock ensure that:
- No metal swarf or other contaminants enter the lock body.
- The fixing screws do not damage the product finish.
After installation of the door ensure that:
- The door is correctly adjusted with the correct clearances.
- The lock engages the strike/catch plate correctly.
- The door is protected from building fall-out such as wet plaster, mortar, paint and welding splatter.
If the door becomes contaminated:
- Do not paint the lock body or faceplate.
- Remove wet plaster, cement, mortar and other droppings immediately, using ample clean water and a sponge or rag, to avoid permanent staining or scratching of the product finish. If removal is delayed and scraping becomes necessary the surface finish may suffer.
