Aurora Long Plate Levers
A unique combination of style and innovation. The Aurora range of levers are inspired by the popular Gainsborough Aurora lever. This means you can have the same style of lever on almost every door of a home.
Available in both standard and disability compliant (DDA) models. Comes in black, silver and can also be powder coated to any colour at our Melbourne based factory. Easy to use, easy to install and can be used on timber and aluminium doors.
Description
Product Features
- Long plate lever furniture for hinged doors for residential and semi-commercial applications
- Contemporary and stylish sliding snib for privacy locking from inside, when used with Austral Lock Virtus hinged mortice locks
- High quality zinc die cast furniture
- Long lasting powder coated finish*
- Easy handing with handing pieces
- Compatible with 2 point and 4 point hinged mortice locks (lever up to throw the top and bottom shootbolts)
- Configurations available with a return to door lever (complies to AS1428.1 requirements) for improved accessibility applications
- Compatible with industry standard Euro profile cylinders
*can be powder coated to standard 25 finishes available on Austral Lock colour chart with 10 days lead time, any other finish may attract additional costs and longer lead times
Colour Chart
Installation
The product must be installed according to the instructions included in the product packaging and the door should be apertured according to the door “cut-out” dimensions and tolerances shown.
Prior to fitting ensure that:
- Doors stored on site are stored in a clean dry area free from cement, lime, paint, acid etc.
During fitting of the lock ensure that:
- No metal swarf or other contaminants enter the lock body.
- The fixing screws do not damage the product finish.
After installation of the door ensure that:
- The door is correctly adjusted with the correct clearances.
- The lock engages the strike/catch plate correctly.
- The door is protected from building fall-out such as wet plaster, mortar, paint and welding splatter.
If the door becomes contaminated:
- Do not paint the lock body or faceplate.
- Remove wet plaster, cement, mortar and other droppings immediately, using ample clean water and a sponge or rag, to avoid permanent staining or scratching of the product finish. If removal is delayed and scraping becomes necessary the surface finish may suffer.
Maintainance & Cleaning
Maintenance
Annually inspect the door to confirm that the door operates with the correct clearances, closes and opens without obstruction. Confirm that the lock bolt or beak engages easily with the strike/catch plate when the door is closed and the lever or key is turned – adjust the door if necessary.
Annually check that when the door is closed, the lock can be locked by key and by the lever.
NB : The lock assembly has been lubricated for life, and should not be disassembled by the user.
Cleaning Powder Coatings
Every six months, powder coated surfaces should be cleaned to protect the finish. However, in areas where pollutants are more prevalent, especially in coastal or industrial regions, cleaning should be carried out every two to three months.
To clean the powder coated surface:
- Carefully remove any loose deposits with a wet sponge.
- Use a soft brush (non abrasive) or cloth and a mild household detergent solution to remove dust, salt and other deposits. Do not use steel wool, scrapers, scouring liquids or powders to remove deposits as these permanently scratch the coating surface.
- Rinse off with clean fresh water.
Cleaning Chrome, Satin Chrome, Gold and Brass Finishes
Plated finishes are susceptible to tarnishing if they come into contact with moisture, wet paint, or water vapour.
All plated finishes should be coated with a non-abrasive furniture or car wax immediately after installation.
Plated finishes should be regularly wiped with a non-abrasive furniture or car wax, taking care not to scratch any protective finishes that are employed to protect the surface and prevent tarnishing.
