Forge Hinged Security Door Hook Bolt Lock
Clean and modern mortice lock for hinged security doors, with a jemmy resistant deformable strike plate. Compatible with cable multipoint kits*.
Part of the Forge series of furniture for hinged and sliding security, surface mount patio and mortice hinged and sliding doors.
Readily available in Black (BLST), White (WHGL) and Monument (MON). Can be powder coated to almost any Dulux or Interpon colour at our Melbourne based facility.**
Description
Product Features
- Interior snib lever for quick and convenient locking without the need for a key
- The jemmy resistant strike plate is designed to deform under attack to enable the strike plate to remain engaged with the bolt even as the door is jemmied away from the door jamb
- A pivoting latch bolt hooks behind the a profiled strike plate to provide enhanced resistance to forced entry
- Fixing screws only accessible from the inside, providing enhanced security
- Stainless steel faceplate
- High quality Zinc die cast substrate
- Designed and tested in Australia**
- Easy installation for both new and retrofit applications
- Fits into industry standard cut-outs
- Suits both left and right hand opening hinged doors
- 7 year limited tarnish resistant and 10 year limited mechanical guarantee
*Forge Security Hook Bolt Locks are compatible with cable (UKIT & HD16PLUS) operated multipoint kits. These kits provide a top and bottom bolt, each connected to the main lock body by a cable. The remote bolts are activated whenever the door is locked by key or snib.
**Colour matched hardware is locally manufactured, and can be powder coated to standard 24 finishes available on Austral Lock colour chart, any other finish may attract additional costs and longer lead times.
Colour Chart
Installation
The product must be installed according to the instructions included in the product packaging and the door should be apertured according to the door “cut-out” dimensions and tolerances shown.
Prior to fitting ensure that:
- Doors stored on site are stored in a clean dry area free from cement, lime, paint, acid etc.
During fitting of the lock ensure that:
- No metal swarf or other contaminants enter the lock body.
- The fixing screws do not damage the product finish.
After installation of the door ensure that:
- The door is correctly adjusted with the correct clearances.
- The lock engages the strike/catch plate correctly.
- The door is protected from building fall-out such as wet plaster, mortar, paint and welding splatter.
If the door becomes contaminated:
- Do not paint the lock body or faceplate.
- Remove wet plaster, cement, mortar and other droppings immediately, using ample clean water and a sponge or rag, to avoid permanent staining or scratching of the product finish. If removal is delayed and scraping becomes necessary the surface finish may suffer.
Maintainance & Cleaning
Maintenance
Annually inspect the door to confirm that the door operates with the correct clearances, closes and opens without obstruction. Confirm that the lock bolt or beak engages easily with the strike/catch plate when the door is closed and the lever or key is turned – adjust the door if necessary.
Annually check that when the door is closed, the lock can be locked by key and by the lever.
NB : The lock assembly has been lubricated for life, and should not be disassembled by the user.
Cleaning Powder Coatings
Every six months, powder coated surfaces should be cleaned to protect the finish. However, in areas where pollutants are more prevalent, especially in coastal or industrial regions, cleaning should be carried out every two to three months.
To clean the powder coated surface:
- Carefully remove any loose deposits with a wet sponge.
- Use a soft brush (non abrasive) or cloth and a mild household detergent solution to remove dust, salt and other deposits. Do not use steel wool, scrapers, scouring liquids or powders to remove deposits as these permanently scratch the coating surface.
- Rinse off with clean fresh water.
Cleaning Chrome, Satin Chrome, Gold and Brass Finishes
Plated finishes are susceptible to tarnishing if they come into contact with moisture, wet paint, or water vapour.
All plated finishes should be coated with a non-abrasive furniture or car wax immediately after installation.
Plated finishes should be regularly wiped with a non-abrasive furniture or car wax, taking care not to scratch any protective finishes that are employed to protect the surface and prevent tarnishing.
